Call our friendly team today 01258 472132

Easy oil tank removal or replacement with Total Energy Services

Are you looking for an honest, local company to safely and correctly remove or replace your oil tank?

Family owned and run Total Energy Services have more than 25 years experience in repairing, replacing and removing oil tanks across Dorset, Somerset, Wiltshire and Hampshire. Based in the rural market town of Blandford our team of OFTEC oil engineers are here to assist you with all your oil heating needs.

Easy oil tank removal or replacement with Total Energy Services

Are you looking for an honest, local company to safely and correctly remove or replace your oil tank?

Family owned and run Total Energy Services have more than 25 years experience in repairing, replacing and removing oil tanks across Dorset, Somerset, Wiltshire and Hampshire. Based in the rural market town of Blandford our team of OFTEC oil engineers are here to assist you with all your oil heating needs.

Oil tank removal

If you require your oil tank removed it is very important to instruct a qualified and certified company. Our oil engineers are all OFTEC registered – this is the governing body for oil fired engineers. Therefore you can rest assured our engineers will carry out the removal in a safe, timely and tidy manner.

We can also dispose of any leftover oil safely if it is not needed.

What our customers say

“I recently had Rob and his team remove my old heating oil tank. From start to finish they were professional and tidy. This is the first time I have used Total Energy but I certainly wouldn’t hesitate to recommended them to friends and family.”

John, Gillingham

Oil tank replacement

Oil tanks typically last at least 10 years and if well maintained they can last much longer. However, it is important to get a professional opinion in if you notice any signs of wear and tear.

If your oil tank causes a leak or spill it can be incredibly costly to clear up and will have a huge detrimental effect on the environment.

Symptoms of wear and tear

  • Oil leaks
  • Condensation
  • Signs of damage
  • Signs of corrosion
  • Plastic swelling
  • Increased fuel usage
  • Bulging

Bunded oil tanks

Traditionally oil tanks were constructed of a single layer of steel and if a crack were to appear this resulted in oil being leaking into the environment.  New bunded oil tanks have a double skin. This means that should a crack or leak appear the oil will be safely contained in the outer skin.

How are oil tanks replaced?

Replacing your oil tank will usually include the following steps.

1. Survey existing tank

Initially we will assess the condition of your old tank.

2. Transfer of oil

Any remaining oil will be safely removed. Clean oil will be pumped into a holding vessel.

3. Removal of the old tank

The old tank will be removed and recycled.

4. New tank installation

If you are re locating the oil tank our team can construct a new concrete base for you prior to the new oil tank being installed. Once in position our engineers will connect the oil supply line.

5. Oil transfer

If there was any re usable oil from the existing tank we will pump this into the new one.

6. Installation check

The engineer will carry out a comprehensive check of the installation including everything is safe and working.

How can we help?

If you would like a free, no obligation quote for a oil tank removal or replacement call our friendly office team on 01258 472132 or email info@totalenergy.co.uk

Get In Touch

    Call us on: 01258 472132


    Share

    Our Accreditations